Connect with us
: Bolt the bracket firmly down to the desk surface using spring washers to absorb hull vibrations. Slide the main transceiver unit into the bracket and tighten the lateral locking knobs. 3. Power Supply and Electrical Wiring SRG-1150DN
The SRG-1150DN includes a for easier maintenance.
Mount the antenna as high and clear of metal masts, rigging, and outriggers as possible to avoid detuning the signal. DSC Watch Receiver Antenna samyung srg-1150dn installation manual
Verify that the display shows a successful tune icon and the Voltage Standing Wave Ratio () drops below 1.5:1. 6. Maintenance and Troubleshooting Keep the system operational with routine checks:
Press the key on the front display cluster of the SRG-1150DN. : Bolt the bracket firmly down to the
: 100-120V or 200-240V, 50/60Hz, using an external power supply like the SP-1250ADC .
is a high-performance VHF/DSC Class A Marine Transceiver designed to meet the strict requirements of professional maritime communication. Adhering to GMDSS (Global Maritime Distress and Safety System) standards, proper installation is crucial to ensure reliability, optimal range, and compliance with maritime regulations. Power Supply and Electrical Wiring SRG-1150DN The SRG-1150DN
Link the data connection interface using the proprietary system bus cable running from the transceiver cabinet to the back panel of the SN-100 terminal.
Inspect the copper strap connection at the ATU base. Ensure the high-voltage wire is clear of metal bulkheads. Excessive DC voltage drop under high-power load.
To prevent interference and ensure DSC functionality, connect the ground terminal on the rear panel to the vessel's ground system using a heavy-gauge wire. 4. Wiring and Peripheral Connections
Adjust the viewing angle of the LCD screen before tightening the knobs completely. 3.3 Power Supply Connection The SRG-1150DN operates on a 24V DC system (24VDC ± 15%). Connect the Red wire to the positive (+) terminal. Connect the Black wire to the negative (-) terminal.