Delphiautocom Cdp — 2017r3 On Win10 Mhh Auto Page 1 Work

The community's official stance is that it only works on Windows 7, 8, and 10 . While some users have reported success on Windows 11 using the RunAsDate trick, it's not officially supported and may introduce random errors.

Getting the diagnostic software to run smoothly on Windows 10 can be a challenging task. Many automotive technicians encounter persistent issues like installation blocks, corrupted files, missing USB drivers, or sudden loss of activation.

This is where most users fail. The default drivers from 2017r3 do not work on Win10.

Once the drivers are successfully loaded, you must link the multiplexer to the software interface.

Full vehicle scan does not function.

I saw a few threads recently where users were struggling to get the older software running smoothly on Windows 10 . Since the 2017 releases are arguably the most stable for the older CDP+ and VCI clones before the security dongles became mandatory in newer versions, I wanted to share a working method.

: When prompted for registration, select the USB/Manual Method . Save the generated FileActivation.xml file onto your desktop or a USB drive.

Before beginning the installation process, ensure your system meets the following software and hardware requirements: System Requirements

Remove any previous versions of Autocom or Delphi. delphiautocom cdp 2017r3 on win10 mhh auto page 1 work

: Extract your Delphi/Autocom 2017.R3 installation archive directly to the root directory of your hard drive (e.g., C:\Delphi2017R3\ or C:\Autocom2017R3\ ). Installing inside C:\Program Files (x86) creates permission conflicts that prevent the software from saving configuration changes.

If the above fails, perform a complete driver reinstall:

Extract the contents directly to the root directory, preferably C:\Main\ or C:\Delphi2017\ .

Ensure you have .NET Framework 3.5 and 4.0 enabled in Windows Features, as the software relies on these older libraries. 2. Software Extraction and Setup Extract your 2017.R3 files (usually found in a Delphi_2017.R3 folder) directly to the root of your C: drive (e.g., C:\Delphi2017 ). Avoid putting it in Program Files to bypass permission issues. Run the installation as Administrator 3. The Activation Process (MHH Auto Method) Run the software and it will generate a FileActivation.xml The community's official stance is that it only

Do not disconnect the USB cable or turn off the vehicle's ignition until the progress bar reaches 100% and the device lights stop flashing.

Connect your Delphi CDP multiplexer to your PC using the USB cable. Do not plug it into the vehicle yet.

Users on MHH Auto typically use a dedicated "Keygen" or send this XML file to reputable "activators" on the forum to get a patched version back.

Click to verify that the software successfully communicates with the multiplexer firmware. Once the drivers are successfully loaded, you must