Unplug the DVR and remove the from the motherboard. Wait 2–5 minutes, then reinsert it and power on.
Gently pop the battery out of its housing using a small plastic tool or screwdriver.
Reinsert the battery, close the chassis, and power the system back up.
Some Tronitek models support a password reset option if security questions were configured during setup. tronitek dvr admin password
Leave the battery out for to allow all capacitors on the board to fully drain. Reinsert the battery, close the case, and power on the DVR.
If those do not work, you may need a CCTV Super Password generator application (available via mobile app stores or security forums). You input your DVR's current display date into the generator, and it outputs a temporary 6-digit or 8-digit code to bypass the login screen for that specific day. Once inside, navigate immediately to the account settings to create a new permanent administrator password. 3. Perform a Hardware Factory Reset
How to Recover and Reset Your Tronitek DVR Admin Password losing access to your security system is incredibly frustrating. If you are locked out of your Tronitek Digital Video Recorder (DVR), you cannot view your security feeds or change system settings. Unplug the DVR and remove the from the motherboard
Once you have gained access, securing your system is crucial to prevent unauthorized access to your security cameras.
If the hardware reset fails (rare, but possible on some locked OEM boards), the only remaining DIY method is reflashing the firmware via the serial console (UART) port on the board. This requires soldering, a USB-to-TTL adapter, and firmware files from Tronitek support.
If you set these up during installation, answering them will allow you to create a new password immediately. Reinsert the battery, close the chassis, and power
Always change the default password immediately after gaining access to prevent unauthorized remote viewing.
Some DVRs offer backdoor methods to reset the password directly from the monitor.
If you are uncomfortable opening the hardware or if the reset button is not visible, your best bet is to contact the manufacturer or the vendor directly.