Qidi X-pro Manual !!link!! Link

The manual says "possible," but doesn't detail:

Carefully remove the printer, power cable, USB drive, and tool kit from the box.

The physical manual is thin on slicing software, but QIDI includes a USB drive with a customized version of . This is arguably the most important part of the "manual" process. qidi x-pro manual

Attach the spool holders to the back of the machine. The package typically includes a tool kit, power cord, USB drive, and a spare dual-extruder assembly. Build Plate: Ensure the magnetic, removable, and flexible build plate

In a dual-extruder system, both nozzles must be perfectly level with each other. If one nozzle is physically lower than the other, it will hit the print. Loosen the small set screw holding the throat tube of the lower nozzle, push it up into the heater block until it aligns with the other nozzle, and re-tighten the screw. Issue 3: Clicking Sound from the Extruder (Under-extrusion) The manual says "possible," but doesn't detail: Carefully

| Problem | Common Causes and Solutions | | :--- | :--- | | | - Unclean Bed : Clean the print surface with isopropyl alcohol. - Incorrect Nozzle Gap : Re-level the bed. - Incorrect Temperature : Ensure the bed and nozzle are at the correct temperature for your filament. | | Print Not Sticking | - Bed Leveling : Re-level the bed for a perfect first layer. - Glue Stick : Apply a fresh, even layer of glue stick to the bed. - Temperature : Double-check that your slicer settings are applying the correct temperatures. Some slicers default to PLA temperatures, so a manual preheat might be needed. | | Warping / Cracking | - Enclosure : The X-Pro has an enclosure; close its doors when printing ABS or Nylon to maintain a warm environment and prevent warping. - Cooling : Turn off the part-cooling fan for the first few layers when printing ABS. | | Failed Print on Power Outage | - Power Outage Detection : The X-Pro includes a power failure or "breakpoint" function. If the power cuts out, the printer will save the head position and resume printing from that point when power is restored. | | The Printer "Thinks" Home is Wrong | - Factory Reset : If the printer seems confused about its maximum print volume or home positions, perform a "Factory Reset" via the settings interface, then power off and on. This can resolve odd travel limits. |

The Ultimate QIDI Tech X-Pro Manual & Setup Guide The QIDI Tech X-Pro is a powerful, dual-extruder 3D printer designed for hobbyists, educators, and professionals who need to print complex geometries using multiple materials or colours. Attach the spool holders to the back of the machine

If you notice circles printing as ovals, your belts may be loose. Check the tension of the X and Y belts; they should feel taut like a guitar string when plucked gently. Tighten them using the tensioners located at the ends of the axes.