Nalco 3dt 449 Msds New -

| Property | Specification / Value | | :--- | :--- | | | Corrosion and Scale Inhibitor | | Chemistry | All Organic (heavy-metal free) | | Physical State | Liquid | | Appearance | Typically an opaque liquid solution | | Specific Gravity (at 20°C) | 1.0 (density ~8.3 lbs/gal) | | pH (as supplied) | 33 (Some sources list 33 as the pH, but this is likely a data anomaly. Corrosion inhibitors are often in the 1-4 or 10-12 range. The SDS should be consulted for the accurate value and is related to its formulation.) | | Freeze Point | 32°F (0°C) | | Solubility | 100% soluble in water | | Typical Dosage | ~57-185 ppm (mg/L) as product in system water, depending on application |

Managed under the Ecolab umbrella, this specialty blend prevents the formation of calcium carbonate and calcium sulfate deposits, acts as an excellent dispersant for calcium phosphate and iron oxides, and exhibits high thermal stability in systems using oxidizing biocides. Keeping up with the latest Safety Data Sheet (SDS/MSDS) updates for this product is critical for maintaining workplace compliance, minimizing ecological footprint, and ensuring handling safety. Key Product Technical Overview

Flush the trace residue with plenty of water, ensuring compliance with local drainage regulations. 7. Handling and Storage

: It maintains performance in water systems using oxidizing biocides. Essential Material Composition nalco 3dt 449 msds new

: Holds current NSF Registration (Category G7), certifying it acceptable for treating boilers and cooling systems where treated water/steam does not directly contact edible food products. Hazard Identification & Regulatory Classification

: Immediately take off contaminated clothing and rinse skin with plenty of water/shower. Eye Contact

: Non-flammable and non-combustible. However, contact with strong oxidizing materials (e.g., chlorine, peroxides, chromates) can cause thermal reactions or release hazardous byproduct vapors. | Property | Specification / Value | |

Nalco 3DT 449 is a specialized chemical program developed by Nalco Water, primarily utilized within the petroleum refining and hydrocarbon processing industries for desalter operations and crude oil flexibility. As environmental regulations and safety standards have evolved, the documentation for this product has transitioned from the older MSDS (Material Safety Data Sheet) format to the now-standardized SDS (Safety Data Sheet) format under Globally Harmonized System (GHS) guidelines.

Protects metal surfaces within cooling towers, heat exchangers, and boilers from corrosive damage.

: Inhibits scale buildup and equipment corrosion. Keeping up with the latest Safety Data Sheet

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. SAFETY DATA SHEET 3D TRASAR® 3DT294

: If it becomes waste, it may meet the criteria for hazardous waste (D002) due to corrosivity. Regulatory and Compliance Status Nalco 3DT449, Pack of 25kg - ইকেম

: Highly resistant to degradation from high thermal loads and continuous oxidizing biocide exposure.

Specific physical and chemical properties such as boiling point, flash point, vapor pressure, and solubility are provided in the official manufacturer's documentation. These values are critical for determining the proper handling and storage requirements in an industrial setting. Section 10: Stability and Reactivity