Vw 1.2 Tsi Injector Removal ❲2026❳

: Carefully disconnect the electrical plugs; these can be brittle from heat. Installation Tips TSI FSI Injector Puller

The VW 1.2 TSI injector removal is a for a first-timer, 90 minutes for a pro. The cost of DIY is ~$300 in tools and seals versus ~$1,500 at a dealer.

Keep the slide hammer perfectly straight and aligned with the angle of the injector.

Carefully slice the old Teflon ring using a razor blade, taking care not to scratch the injector tip groove. vw 1.2 tsi injector removal

Next, use a Torx screwdriver (T30) to loosen the electrical connector:

Use a fuel injector removal tool (specific to VW 1.2 TSI engines) to gently pull the fuel injector out of the engine:

One VW owner discovered after removal that their cylinder 2 and 3 injectors showed signs of bad or torn O-rings, while cylinder 2 was completely drenched in fuel. Inspect everything carefully—the visible condition can reveal underlying problems. : Carefully disconnect the electrical plugs; these can

: Squeeze and pull the electrical connectors from each of the four injectors. Remove Rail Bolts

Re-seat the fuel rail and torque the mounting bolts to factory specifications (typically around 20 Nm, but verify for your specific engine code).

Method: Remove the fuel pump fuse, attempt to start the engine, and wait for it to stall. Torx drivers (T30) Socket set (10mm) Keep the slide hammer perfectly straight and aligned

Reconnect the battery and start the engine:

Do you have access to the for the seals and puller?