Full __top__ — Narco Escort Ii Installation Manual

To help tailor this information further, please let me know:

Uses a gas discharge display for frequencies and a row of lights (instead of mechanical needles) to show VOR/LOC deviations. Operational Characteristics

: Ensure that 14V systems include a permanent bridging jumper between Pin 8 and Pin 10 to route transmitter power properly.

Tune to a nearby VOR station. Verify that the CDI needle centers correctly and the TO/FROM flag displays accurate data. narco escort ii installation manual full

The Escort II features two separate coaxial input ports on its backplate:

Prior to inserting the radio into the tray, turn on the avionics master switch and verify exactly +13.75 VDC at Pin 2 relative to Pin 1 on the harness connector. Turn power off.

Secure the tray to the aircraft panel using appropriate mounting hardware. The tray must be securely grounded to the airframe. To help tailor this information further, please let

Ensure the mounting rack is securely fastened to the instrument panel.

Run an 18 AWG red wire from the 14V bus bar through a dedicated circuit breaker to Pin 2. Run an 18 AWG black wire from Pin 1 to a clean, paint-free structural airframe ground point.

Before buttoning up the instrument panel, perform a thorough system checkout: Verify that the CDI needle centers correctly and

Narco Escort II Installation Manual Document Status: Full Manual Analysis Date: October 26, 2023

Verify that the gas discharge frequency windows illuminate cleanly. Cover the photocell on the bezel to confirm that the display dims correctly under simulated dark conditions.

Ensure correct input voltage at Pins 1 and 2 before sliding the radio into the tray.