Disco 240 Dmx Controller Manual -

Once you’ve saved multiple scenes, you can play them back automatically: Auto Mode: button so the Auto LED lights up.

The controller sends DMX values as follows (Faders 1-16 = Channels 1-16 relative to fixture start address):

Understanding the physical layout of the Disco 240 is essential before diving into programming. The control surface is divided into distinct operational zones. Front Panel Zones disco 240 dmx controller manual

To enter this state, press the button repeatedly until the MANUAL LED lights up.

Press a Chase button (1-6) to select which chase to program. Once you’ve saved multiple scenes, you can play

If you’ve just bought one or are struggling with its interface, you’ve come to the right place. This article serves as a comprehensive guide, combining insights from official resources like the and the HD-240 Instruction Manual to answer all your questions.

A standard 3-pin female XLR port used to transmit data to the fixtures. Front Panel Zones To enter this state, press

This comprehensive manual covers everything from basic layout identification to advanced chase programming. 1. Hardware Layout and Interface Overview

The Speed fader controls how long a scene stays on screen before changing. The Cross (Fade) Time fader dictates how smoothly one lighting look transitions into the next.

This manual is reproduced from the original technical documentation for educational and reference use. The "Disco 240" is also sold under names like Showtec DMX 240 , Omnitronic DMX-240 , and Chauvet DMX-240 with identical operation.

: Pressing this resets all DMX values to 000 across all channels. Press it again to resume your programmed settings. 2. Manual Operation To control lights manually without running a program: