If your firmware update fails or causes the Wallbox to behave erratically, use these troubleshooting steps to resolve the issue: The Update Fails to Complete Weak Wi-Fi signal or network interruption.
If your Vestel Wallbox is connected to an OCPP 1.6J central system (e.g., Monta, GreenFlux, local CSMS):
Navigate to the gear icon within the specific charger's menu.
: Never use firmware meant for a different hardware revision. Confirm your current version in the under "System Maintenance" before proceeding. Password Reset
Click and allow the system to reboot automatically. Troubleshooting Common Update Issues
If a new version is available, an "Update Available" notification or button will appear.
There are two primary methods to perform an update, depending on your model’s connectivity:
As of mid-2026, Vestel is beta-testing for the new EVC40 series. However, legacy EVC10/30 owners will receive a backported subset:
: The wallbox LED indicators will flash during installation. The unit will automatically restart once complete. Do not plug your vehicle into the charger during this time. Method 2: Manual Update via Web UI (Advanced Users)
Once the file is uploaded, the button will become active 1.2.1.
Adds Modbus TCP support for local management (crucial for evcc-io users).
Vestel Wallbox Firmware Update
If your firmware update fails or causes the Wallbox to behave erratically, use these troubleshooting steps to resolve the issue: The Update Fails to Complete Weak Wi-Fi signal or network interruption.
If your Vestel Wallbox is connected to an OCPP 1.6J central system (e.g., Monta, GreenFlux, local CSMS):
: Never use firmware meant for a different hardware revision. Confirm your current version in the under "System Maintenance" before proceeding. Password Reset
As of mid-2026, Vestel is beta-testing for the new EVC40 series. However, legacy EVC10/30 owners will receive a backported subset:
: The wallbox LED indicators will flash during installation. The unit will automatically restart once complete. Do not plug your vehicle into the charger during this time. Method 2: Manual Update via Web UI (Advanced Users)
Once the file is uploaded, the button will become active 1.2.1.
Adds Modbus TCP support for local management (crucial for evcc-io users).
