Wedo Paket 50 User Manual |best| ✧ 〈PREMIUM〉

: Press again to shut down manually. When powered via battery block, an automatic 60-second shutdown timer turns off the scale after one minute of total inactivity to protect battery life. 2. TARE Button

When using battery power, the scale automatically shuts down after approximately 60 seconds of inactivity to preserve battery life.

Place your items inside the container. The screen will display only the net weight of the goods.

: Distribute the 50 user modules across your workstations. Group them using network switches or daisy-chain expansion ports if utilizing a serial-bus configuration. wedo paket 50 user manual

It is recommended to check the scale's accuracy every 6 months, particularly if used daily in a warehouse environment. 5. Technical Data Specification Max Load 50 kg (110 lbs) Accuracy 5 g increments Platform Size 25 × 25 cm Display Unit Size 18.0 × 3.5 × 9.5 cm Units Counting Ref. 25, 50, 75, 100 pcs Power 6V AC Adapter (Included) or 4x AAA batteries Warranty 3 Years (usually provided by WEDO) 6. Troubleshooting

The system will immediately prompt you to create a new, secure administrative password. Do not skip this step. Provisioning the 50 User Accounts

Never submerge the scale in water or use harsh chemical cleaners, as this can damage the internal load cells. Common Error Codes : Press again to shut down manually

Hold the button and press ON/OFF . Release both when a random internal code appears.

Check that the platform does not rock. If it is uneven, debris may be trapped underneath the feet. 3. Basic Operating Instructions Powering On

Verify jumper position (voltage vs. current). Also check that the common ground (GND) is shared between the sensor and the Paket 50. TARE Button When using battery power, the scale

button to "freeze" the weight on the display. This is useful for large packages that block the screen; the reading remains visible after the item is removed. Counting (Plus Model) Zählfunktion

The default port is 80. Ensure no firewall blocks it. Alternatively, use the USB service port with a terminal emulator (115200 baud, 8N1) and type ifconfig to see the actual IP.

The scale is equipped with a calibration function for checking, but for commercial, non-commercial, or precise industrial applications, it is designed for consistent accuracy without constant re-calibration.