Features 45mm fixing centers , making it a drop-in replacement for older V100 models without needing modifications to the pipework.
Hard water and scale buildup are the primary enemies of thermostatic shower valves. Regular maintenance keeps the Caraflo V200 functioning smoothly. Cleaning the Exterior
Before beginning installation, ensure your water system matches the operational parameters of the valve. 0.5 bar Maximum Operating Pressure: 5.0 bar Recommended Pressure: 1.0 to 3.0 bar Hot Water Supply Temperature: 55°C to 65°C Cold Water Supply Temperature: 5°C to 25°C
The Caraflo V200 is a high-quality unit built to last, but it has some key specifications you should be aware of to ensure it works properly and safely. caraflo v200 shower instructions
: One knob regulates the water volume and turns the system on or off. Rotate the flow knob counter-clockwise to start the shower and increase water pressure. Turn it fully clockwise to shut it off completely.
Frozen water expands and can easily crack the internal valve of a Caraflo V200.
To maintain the finish and performance of your CaraFlo V200: Features 45mm fixing centers , making it a
| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | Power source issue (dead batteries) or no water supply. | Replace batteries (usually AA inside the control box) or check main water valves. | | Water is too cold | Hot water supply cut off or inlet filters blocked. | Check if the water heater is working. Clean the hot water inlet strainer. | | Temperature fluctuates | Unbalanced water pressure or dirty thermostatic cartridge. | Ensure no other appliances (washing machine/toilet) are using water simultaneously while showering. Clean cartridge. | | LED Display fading | Low battery voltage. | Replace batteries immediately to prevent the valve from sticking in the "open" position. | | Water drips after shut off | Residual water in the pipe. | This is normal for a few seconds. If it persists, the internal solenoid valve may need cleaning or replacement. |
Secure the mounting plate or elbows to the wall using the provided wall plugs and screws.
The Caraflo V200 is designed for simplicity. Unlike home showers, it is engineered to work efficiently with the limited water supply and lower pressure typical of mobile water systems. Turning the Shower On Rotate the flow knob counter-clockwise to start the
Flush out the water lines prior to mounting to prevent debris from logging into the new cartridge. Step-by-Step Mounting V200 Caravan Shower Mixer Valve 45mm Centres Caraflo
| Control | Function | |---------|----------| | (temperature) | Rotate to set desired temperature (max 38°C safety stop). Push button to override to 40–48°C. | | Right / front handle (flow) | Rotate to increase/decrease water flow. Pull to turn on, push to turn off. | | Diverter knob (if present) | Switch between overhead shower, hand shower, or both. |
Operating the Caraflo V200 is straightforward, using two main controls to manage water flow and temperature:
When Sarah was ready to get out of the shower, she simply turned the handle back to the "off" position. The water stopped flowing immediately, and she was pleased to see that the V200 had automatically shut off, saving water and energy.