The is a versatile 6V-60V DC battery controller designed to protect both batteries and loads by managing charge and discharge cycles.
Follow these steps carefully to prevent damage to the module, your battery, or connected equipment.
Features include automatic power-off and time-limited charging to extend battery longevity.
The relay closes (powers the load) when battery voltage is above the Upper Limit (UP) . It opens (cuts power) when voltage falls below the Lower Limit (dn) to prevent deep discharge. Setup and Programming xycd60 manual
The module supports two primary work modes, which you can toggle by long-pressing the UP button for five seconds: Charging Control (P-1 / IN): Activation:
Title: Understanding the XY-CD60 Voltage Controller: A Guide to Precision Battery Management 1. Introduction
Press and hold for 3 seconds to enter programming mode. Use +/- to cycle through parameters: The is a versatile 6V-60V DC battery controller
Реле заряда-разряда аккумулятора XY-CD60L
Toggle between viewing battery percentage (%) and remaining time. Short Press STOP Manually turn the relay ON/OFF. Important Technical Notes
The battery’s voltage is below 6 V, above 60 V, or the battery type is incompatible. The relay closes (powers the load) when battery
The is a versatile digital battery charge and discharge control module designed to protect battery packs, particularly lithium-ion, LiFePO4, and lead-acid batteries, from overcharging and over-discharging. It features a digital display, relay control, and adjustable voltage settings. This article serves as a comprehensive guide, functioning as an XY-CD60 manual to help you configure, install, and operate this module effectively . 1. Product Overview and Technical Specifications
Setting XY-CD60 controller at ISTA Breeze charge controllers
: Although the XY‑CD60 can measure up to 60 V, it is designed for 48 V systems (maximum) because a fully charged 48 V lead‑acid battery can reach approximately 60 V. For 60 V systems, consider the XY‑CD60L variant or an alternative module.
If you have a specific XY-CD60 model (e.g., XY-CD60L, XY-CD60H, or a different variant), let me know and I’ll adjust the details.