Test Point Driver Huawei !new! Jun 2026

Plastic spudgers, suction cups, and precision screwdrivers (typically Torx or Phillips) to safely remove the back cover and internal shields.

: Look for "USB SER" or "Other Devices" with a yellow exclamation mark.

Enables communication between a PC and a Huawei device in "Test Point" or "Factory" mode, typically used for Kirin chipset devices.

With the US sanctions and Huawei’s shift to , the landscape is changing. Newer models (Mate 60, P60, Nova 12) use a customized boot ROM that either has no accessible test points or requires an authorized Huawei Service Tool with a hardware dongle. The era of freely using test point drivers for security bypasses is ending. test point driver huawei

The (often packaged as the Huawei USB COM 1.0 Driver ) translates the instructions between your Windows PC and the raw hardware interface of the phone. Once properly installed, your computer will recognize the device under your Ports section as Huawei USB COM 1.0 (COMxx) . Prerequisites Before Installation

Safety, legality, and risks

This usually means Windows loaded a generic Microsoft driver instead of the Huawei driver, or the hardware connection is unstable. With the US sanctions and Huawei’s shift to

: You can use the HUAWEI One-click Driver Download Tool or HUAWEI PC Manager to manage standard drivers.

To install the Huawei Test Point driver (commonly recognized as ), follow these steps to resolve "USB SER" errors and enable flashing or unlocking on your device. 1. Download the Required Driver

After installing, the driver name will appear as: The (often packaged as the Huawei USB COM 1

There is no downloadable file called "Test Point Driver." The content you are looking for involves:

This is where the (technically known as the HUAWEI USB COM 1.0 driver ) becomes essential. This guide explains what this driver is, why it is necessary, and how to safely install and use it to revive dead Huawei hardware. What is a Huawei Test Point?

When a Huawei smartphone suffers a severe system failure, standard recovery methods like Fastboot mode or eRecovery often become inaccessible. The device may appear completely dead, failing to power on or respond to button combinations—a state known as a hard brick.

Once your computer is prepared, follow this hardware sequence to establish a connection: