Canon Service Mode Tool Version 1050 Free [work] Jun 2026

Click on under "Ink Absorber Counter" to reset the counter to zero. Turn off the printer and turn it back on. Important Warnings and Precautions

If you are looking for alternatives, you can buy a specialized Service Tool from PrinterFix that supports modern models. Conclusion

Click under the "Print" section to verify that the counter is reset (the report will show canon service mode tool version 1050 free

: The green power light should flash a few times and then remain steadily lit. Your computer may play a sound indicating a new USB hardware device has been detected. If the light flashes continuously or an orange error light stays on, the printer failed to enter Service Mode, and you must start over. Step 2: Operating the Service Tool Software

If the tool displays "Error 006," the software cannot communicate properly with the printer chip. Click on under "Ink Absorber Counter" to reset

The Canon Service Tool is a piece of proprietary software designed by Canon primarily for authorized service centers to maintain, repair, and reset printers. While newer versions of these tools exist (such as V2000, V3400, and V4720), the V1050 version gained legendary status because it was widely leaked and supported a huge array of popular consumer printers during the late 2000s and early 2010s.

The Service Tool version 1.050 is more than just a simple "reset" button. It is a versatile diagnostic and maintenance suite that enables the following functions: Conclusion Click under the "Print" section to verify

Many sites offering "Free Service Tool" downloads bundle the software with malware, trojans, or adware.

If you get "Error 006," it usually means the service tool version is incorrect for your printer model, or the printer is not truly in service mode.