If the game fails to launch, try running the executable as an .
Log into your Steam account. Because this is an adult/NSFW title, your account preferences must be configured to allow mature content. Purchase the game and click . Open the desktop Steam client and head to your Library .
Choose the preferred storage drive and wait for the 500 MB download to complete. 2. GOG Installation & Language Configuration Open the GOG Galaxy client or log into the web portal.
Futanari di Funghi is an adult-themed restaurant management game developed by Ahegames where players take on the role of a waitress named Pipina Tina. The game is available on multiple platforms, including and Android . Installation Instructions futanari di funghi install
How to Install and Play Futanari di Funghi: The Ultimate Setup Guide
Open your graphics card control panel (such as NVIDIA Control Panel) and set a manual frame rate limit of 60 FPS for the game's executable if the item movement or interactive pouring segments move too quickly. The storefront you bought it from (Steam, GOG, or Itch.io?) The specific error message you see
Navigate to the developer's distribution platform on the Ahegames Itch.io Devlog Page.
Toggle on inside the security settings.
: Antivirus software can sometimes flag adult indie games incorrectly as false positives. Check your software quarantine vault and add an exclusion rule for the installation folder. Purchase the game and click
To install Futanari di Funghi , the process depends on the platform you are using. The game is available on PC (Windows and Mac), Android, and through digital storefronts like Steam and GOG. Installation by Platform PC (Itch.io): Download the file from the itch.io game page Extract the contents using a tool like WinRAR or 7-Zip. FutanariDiFunghi.exe file to start the game. If the game fails to launch, some users found that running the application as an administrator resolves the issue. PC (Steam/GOG): Purchase and install the game directly through the Steam client GOG Galaxy launcher
To install , download the official files from verified storefronts like Steam or Itch.io , extract the .zip archive using an extractor like 7-Zip, and run the setup.exe or local application file.
Choose your local storage directory and let the file package download fully. 2. GOG Client and Offline Installation
Pros
Automatic Jump Cuts
Multi-Camera Editing
Social Clip Creator
Time-Saving Automation
Adobe Premiere Compatibility
Cons
Subscription Cost
Specific Use Case
FAQs
What is Autopod AI?
Autopod AI is an AI-powered tool that automates the editing process for video podcasts, saving time and enhancing productivity
How does Autopod AI integrate with Adobe Premiere Pro?
Autopod AI functions as a plugin for Adobe Premiere Pro, automating tasks like multi-camera editing and jump cuts.
Can I use Autopod AI on both Mac and Windows?
Yes, Autopod AI is compatible with both Mac and Windows operating systems.
Is there a free trial available for Autopod AI?
Yes, Autopod AI offers a 30-day free trial for new users to explore its features.
What are the key features of Autopod AI?
Key features include multi-camera editing, jump cut editing, social clip creation, and automatic audio synchronization.
My Story with AutoPod
My team and I edit a lot of videos—a lot. We’re talking double digits every single week. This isn’t just short-form content; this is mainly long-form podcast episodes and full talking-head videos.
When it comes to editing, it takes an insane amount of time. If you’re a video editor or just getting into the content creation game, you understand the amount of time you have to dedicate to editing.
It’s the part that isn’t always fun—we’re talking about removing silences or just switching cameras.
Luckily, there is a tool to help us out, which can save us hours on every single video. This is AutoPod.
How to Download AutoPod?
To get started with AutoPod, download the Autopod software. This is just a tool that we’ve been using on our side for the last few months. It saves us a lot of time, so I want to share exactly how to use it, and hopefully, you can do the exact same thing with the time you’re able to save.
Once you’ve bought into AutoPod and your trial has started, you can begin the process of installing the AutoPod extension into Premiere Pro.
It’s fairly simple to do, and AutoPod even shows you what to do.
Once done, you’ll see the AutoPod Jump Cut Editor, AutoPod Multi-Camera Editor, and AutoPod Social Clip Creator in the Extensions menu.
Let’s start with the Jump Cut Editor. You’re seeing on screen that I’ve brought over a video I recorded about 36 minutes long.
I found there are quite a few gaps in between all of it. It’s not one full recording from start to finish where I nailed it perfectly—that never happens.
I mess up quite a bit, especially with some of these longer recordings.
In this case, I or one of my video editors would typically go through and remove each of those silences and any mistakes I make. This could take quite a bit of time, depending on whether I’m going to sit there and press play all the way through or just try to find those silences and remove them.
This is the tedious part that can take a lot of time.
1. Select Jump Cut Editor
But it’s not a problem because, once we go over to Windows > Extensions and open the AutoPod Jump CutEditor, it will start to remove the silences throughout the video automatically.
2. Adjust Jump Cut Editor settings
We want to make sure that it’s going to cut off points that are less than minus 45 dB. This also removes other stuff within the recording, like dead air or mumbling into the mic.
You can also change the settings to disable mode, which cuts all of these spaces but just disables the clips, or you can leave it in standard mode, which completely removes and deletes those spaces.
In my case, I want to delete them, so I’ll go through and delete them. Then, I’ll preview the first section to show what it’s removing. Once I’m satisfied, I’ll create the jump cuts. AutoPod will go through all the footage, figure out where to make the cuts, and automatically do it.
After waiting a minute, it makes loads of different cuts throughout the video. Once it’s done, it deletes everything unnecessary, condenses the footage, and completes the jump cut process.
3. Result:
For example, in a 36-minute recording, it condensed it down to 27 minutes. I still need to go through and remove mistakes or clean up the cuts, but AutoPod saves me so much time.
Multi-Camera Editor
The Jump Cut Editor is pretty cool, but where AutoPod really excels is in its multi-camera editing capabilities. This is especially useful for podcast episodes with multiple guests on different camera angles.
With the Multi-Camera Editor, you can easily switch the camera depending on who’s talking.
For example, I have the host’s audio track at the top and the guest’s audio track at the bottom. When the host is talking, the camera is on them, and when the guest talks, the camera switches.
1. Select Multi-Camera Editor
Without AutoPod, we’d have to make these cuts manually. But AutoPod does it for us. You just need to go to Windows > Extensions and select the Multi-Camera Editor.
2. Adjust Multi-Camera Editor Settings
You need to set up a few things, like choosing the cut method, shot frequency, and the number of speakers and cameras. After setting up, AutoPod tracks when people are talking and automatically makes the cuts.
This process is quicker than the Jump Cut Editor because fewer cuts are needed. Once it’s done, it saves you time by making all the necessary cuts automatically.
3. Result
You may still need to review the footage to ensure there are no mistakes, like if someone repeats themselves or if transitions need cleaning up.
But overall, AutoPod’s Multi-Camera Editor significantly reduces the time spent on initial editing, allowing you to focus on refining the video.
Social Clip Creator
Another feature of AutoPod is the Social Clip Creator, which helps create clips from your recorded and edited footage. I don’t use this feature as much because there are better AI tools and software available for this purpose. However, if you want everything in one program, AutoPod can do it.
For example, if I said something profound in the video, I could use the Social Clip Creator to make a clip suitable for YouTube Shorts, Instagram Reels, TikTok, or Facebook Reels.
1. Select Social Clip Creator
You just select the clip, go to Windows > Extensions, and choose Social Clip Creator.
You can choose how you want the clip to be presented, with options like 1920×1080, 1080×1350, or 1080×1920.
2. Result
AutoPod creates the clips as separate sequences, which you can then edit further by adding captions or text popups. While I don’t use this feature as much, it can be useful for separating your footage into clips.
Some of the links on this website may be affiliate links. This means we may earn a commission if you click through and make a purchase, at no additional cost to you. We only recommend tools and services that we believe will provide value to our readers.
![How To Start A Podcast With No Audience and No Money[15 Steps]](https://autopodcastai.com/wp-content/uploads/2025/07/how-to-start-podcast.jpg)
