Chevron Digital Timer Ew-32 User Manual -

: Use the UP and DOWN buttons to select the correct hour, minute, and day of the week.

While holding , press the HOUR button to change the current hour.

Switching Between 12-Hour (AM/PM) and 24-Hour (Military) Time

Re-check your "ON" and "OFF" times and ensure you are not using overlapping programs.

Chevron Digital Timer EW-32 User Manual: Complete Programming & Troubleshooting Guide chevron digital timer ew-32 user manual

Press the WEEK and HOUR buttons simultaneously. A RANDOM or R icon will appear on the display screen.

The button toggles how the timer behaves. The current active mode is displayed at the bottom of the LCD screen.

The internal battery is likely depleted. Plug the unit into a live wall socket for 30 minutes. If the screen remains blank, use a paperclip to press the button.

This guide is for informational purposes. Always consult a licensed electrician for permanent installation. The Chevron brand and EW-32 model are trademarks of their respective owners. : Use the UP and DOWN buttons to

Before installing the device, ensure your electrical load does not exceed the manufacturer's rated limits. 125VAC, 60Hz Maximum Resistive Load: 15A, 1875W Maximum Inductive Load: 8A (Ballast) Tungsten Rating: 1000W

The timer will turn on/off arbitrarily between 18:00 and 06:00. Press again to cancel. 6.2 Daylight Savings Time (Optional)

The EW-32 has a manual override button labeled (or sometimes just MODE ). Pressing this changes the current operation state, which is tracked by an indicator line or indicator text at the bottom of the LCD screen.

Getting started

Press the button again. The screen will now display 1 OFF .

: Plug the timer into a standard power outlet and leave it for 2 to 14 hours .

If the timer is currently supposed to be on, cycle the mode to , then switch to AUTO (the screen will read AUTO ON ). 6. Advanced Features: Random and Daylight Saving Time Random Security Mode (VACATION Mode)
 

 

Chevron Digital Timer Ew-32 User Manual -

If you are not yet ready to create and put your web site online we will "park" your domain on our servers absolutely free. With our parking service your domain will be visible to the world with a coming soon page. If you have already setup the DNS for the domain on our system, setting up the parking page will change the IP addresses of the domain name and www of the domain, (i.e. yourdomain.com and www.yourdomain.com) to our server IP address while other data in the domain DNS remain the same. When you are ready to get your site online you may do so at any time by updating your domain DNS information on our system.

The parking page works only when the domain is using our name servers.

If the domain is not using our name servers, you must change the name servers of the domain to our name servers ns1.dnsExit.com ns2.dnsExit.com ns3.dnsExit.com ns4.dnsExit.com before you setup the parking page.

The parking page will show up on web browser in 2 minutes if the domain is pointing to our name servers. New registered domains could take take up to 24 hours to show up.


To setup a parking page for a domain, simply select or enter the domain name and then click on submit button.
Enter the domain name: www.