The TS1162 is built for durability in harsh environments, featuring a high resistance to dust and water. IP67 (Dust-tight and waterproof).

: Rated IP67 for superior weather and dust resistance.

Before beginning, it is critical to ensure that all necessary precautions and requirements are met. Proper preparation prevents the majority of common failures.

: Choose a flat, solid, vertical mounting surface. Uneven surfaces can warp the backplate, causing optical tamper faults or letting moisture bypass the rear seal.

Before beginning the physical installation, verify your environmental and system requirements against the unit's technical baseline: Specification Detail Challenger RS-485 LAN / Intelligent Access Controller Maximum Cabling Distance Up to 1.5 km (4,921 feet) from the main panel Environmental Protection Rated to IP67 (dustproof, waterproof) Input Interfaces 1 x Request to Exit (RTE) control input Output Interfaces 1 x Open Collector output (door relay/strike control) Visual Indicators 3-LED Status Display (System, Ready, Armed) Step 1: Pre-Installation and Safety Protocol

Typically used to trigger a low-current local door relay or strike. 3 x System Status LEDs

Use the base as a template to mark mounting holes on a flat, vertical surface.

Ensure all personnel wear a grounded ESD wrist strap connected to a verified chassis ground.

The TS1162 can be surface-mounted directly onto a wall or into a suitable back box.