Smartcarve 43 Manual -
Layer Tab: Displays a list of colored vectors. Used to assign specific power, speed, and processing modes (Cut vs. Engrave) to individual design elements.
Represents the physical workbed of your laser machine. Ensure your artwork stays within these grid boundaries.
Whether you are setting up a new laser system or upgrading your existing workflow, this manual provides the essential instructions needed to master SmartCarve 4.3. 1. System Requirements and Installation
Open the installation directory and run SmartCarve_Setup_v4.3.exe as an Administrator. smartcarve 43 manual
The you are trying to cut or engrave.
Fire up your Windows Command Prompt ( cmd ) and type ping 192.168.1.10 . A continuous reply indicates a secure hardware link.
Exclusive to engraving. This defines the step-down distance between each horizontal line scan. A tighter scan gap (e.g., 0.05mm) yields incredibly high definition but doubles the overall processing time. A wide gap (0.15mm) works faster but can display visible tracking lines. 6. Execution: Sending Jobs to the Laser Layer Tab: Displays a list of colored vectors
| Parameter | Description | Typical Range | | :--- | :--- | :--- | | | How fast the head moves. Higher speed = lighter mark. | 100–500 mm/s (engraving); 10–50 mm/s (cutting) | | Min / Max Power (%) | Laser output. Min power is for corners/acceleration; Max is for straight lines. | 10–100% | | Scan Mode | Engraving pattern. | Line (bidirectional), Grid (unidirectional), Gap (skip) | | Pass | Number of times to repeat the operation. | 1 (engrave); 2–5 (thick cut) |
Contains tools for creating primitive shapes (lines, rectangles, circles), entering text, and editing vector nodes.
| Feature | SmartCarve 43 | LightBurn | | :--- | :--- | :--- | | | Free (with machine) | $60 - $100 | | Learning Curve | Steep (requires manual) | Intuitive | | File Formats | DXF, PLT, AI, BMP | SVG, AI, PDF, DXF, JPG, PNG, GIF (more) | | Camera Alignment | No | Yes | | Mac Support | No | Yes | | Stability | Fair (with legacy controllers) | Excellent | Represents the physical workbed of your laser machine
Before you can start creating, it's crucial to set up the SmartCarve software correctly. For your laser machine to communicate with the software, you'll need to handle both the software installation and the hardware drivers.
: Options include X_unilateralism (one-way laser emission) and X_swing (back-and-forth emission) for different engraving effects. Installation Paths smartcarve4-series-manual-do-software-ingles.pdf - Silmaq
The laser head moves rapidly back and forth, sweeping across an area to etch images or text into the material surface.
