If your goal is storage replacement, you do not need to fully remove the motherboard.
Unscrew the remaining brackets holding the heavy LCD panel to the front plastic bezel.
Carefully place the Acer Aspire ZC-610 face-down on your protected, soft surface. acer aspire zc610 disassembly full
Push the two metal securing clips on either side of the RAM stick outward simultaneously. The RAM module will pop up at roughly a 30-degree angle.
Slide the stand assembly out of its slot and set it aside. If your goal is storage replacement, you do
: When replacing the back cover, align the top edge first and slide it down before pressing the clips into place.
Lay down a soft towel, microfiber cloth, or foam padding on your work table. You will place the computer face-down, and you must prevent the glass from scratching. Push the two metal securing clips on either
The CMOS battery (CR2032) is often soldered to a wire plug or in a clip-on holder on the motherboard.
Lift the stand assembly straight up and away from the PC frame. Set it aside. Step 2: Detaching the Back Cover / Rear Housing
Before snapping all the tight plastic perimeter clips of the back cover back into place, lay the rear shell on loosely, plug in the power, and boot the system to verify that the screen, fan, and components work correctly. To tailor any further advice, please let me know:
If you are replacing the drive, unscrew the sides of the metal caddy to free the old drive, and install your new SSD into the caddy. Step 5: Upgrading the RAM (Memory)