Huawei Atn 910d-a: Datasheet

Usually, at this load, the CPU usage would spike, causing jitter. The e-sports stream would buffer. The self-driving cars would disengage their network sync.

The is a hardened, fanless access router designed for the IP edge of mobile backhaul, enterprise access, and utility networks. It’s part of Huawei’s ATN (Access Transport Node) series, optimized for outdoor or unventilated indoor environments.

| Category | Specification | Details | | :--- | :--- | :--- | | | | | | Form Factor | | 1U fixed, rack‑mountable | | Dimensions (H x W x D) | | 44.45 mm x 442 mm x 220 mm (1.75 in. x 17.4 in. x 8.66 in.) | | Weight (basic config) | | Approximately 4.2 kg (DC model) to 4.3 kg (AC model) | | Installation Environment | | Indoor, standard equipment room | | Performance | | | | Switching Capacity | | 880 Gbps | | Port Density | | 4 x 100GE/50GE + 16 x 25GE/10GE/GE/FE + 8 x 10GE/GE/FE | | Interface Types | | 100GE, 50GE, 25GE, 10GE, GE, FE | | Power | | | | Power Supply Options | | Dual modular AC or DC power supplies | | Max Input Current | | DC: 10A; AC: 4A | | Environmental | | | | Operating Temperature | | -40°C to +65°C (long‑term) | | Storage Temperature | | -40°C to +70°C | | Operating Humidity (RH) | | 5% to 85% RH, non‑condensing | | Storage Humidity (RH) | | 5% to 100% RH, non‑condensing | | Operating Altitude | | ≤ 4000 m (derating applies above 1800 m) | | Compliance | | | | Certification | | IPv6 Ready (SRv6 Silver) |

: Includes OSPF, BGP, IS-IS, RIP, VXLAN, MPLS LDP, and RSVP-TE.

Providing high-reliability, low-latency connectivity for enterprise customers with strict Service Level Agreements (SLAs) Huawei Carrier with its sibling, the ATN 910D-C , which offers even higher switching capacity? ATN 910D-A Brochure v2.0 | PDF - Scribd Huawei Atn 910d-a Datasheet

Push-based data streaming via gRPC for minute-by-minute visibility into memory, CPU, port traffic, and optical diagnostics.

: Transporting 2G/3G/4G and 5G traffic from base stations to the core network with high reliability and low latency.

The ATN 910D-A is built for high-density requirements in space-constrained environments like wireless base station cabinets. Specification System Capacity Dimensions (WxDxH) 442mm x 220mm x 44.45mm (1U) ~4.2 kg to 4.3 kg (depending on AC/DC power) Typical Power Consumption Operating Temperature –40°C to +65°C Left-to-right (3 integrated fans, 2+1 backup) Interface Density & Connectivity

: Typical consumption is approximately 180W. Usually, at this load, the CPU usage would

: It is designed to converge multiple services – from legacy 2G/3G/4G to new 5G traffic, as well as high‑value VIP private lines – onto a single, efficient platform.

At only 220 mm deep, it can be installed in the same cabinet as wireless base stations, facilitating large-scale deployment. Application Scenarios

The ATN 910D‑A’s capabilities are unlocked by a rich suite of software protocols, as highlighted in the table below.

Huawei ATN 910D-A Datasheet: Technical Specifications, Architecture, and Deployment Guide The is a hardened, fanless access router designed

The ATN 910D-A provides a flexible combination of legacy and high-speed optical/electrical ports to bridge the gap between old and new infrastructure: Supported Line Rates 25 Gbps / 10 Gbps 10GE (SFP+) 10 Gbps / 1 Gbps GE/FE (SFP/RJ45) 1000 Mbps / 100 Mbps / 10 Mbps 3. Core Software Features and Network Protocols

Utilizes iFIT (In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and automated fault demarcation through the Huawei iMaster NCE platform . Reliability & Environmental Design

The is more than just a datasheet entry – it is a workhorse for modern IP RAN and enterprise aggregation. It successfully marries the service agility of MPLS/Segment Routing with the deterministic performance required for 5G and industrial networks.