While the driver handles the connection, you need a design interface to send jobs.
A standard USB connection. However, internally, the Jinka cutter uses a USB-to-Serial chip (usually CH340 or FTDI) to bridge the connection.
In the device selection screen, add (or JK-1350).
What are you using (SignMaster, Artcut, Flexi, CorelDraw)? What error message or behavior is happening? jinka jk 1351 driver software
Drivers alone only allow communication; you still need design/cutting software to send jobs to the machine. Common options include:
Check your "Mirror" and "Rotate" settings in the output settings of your software.
Once the computer recognizes the connection, your design software needs a "profile" or driver to know how to send coordinates to the machine. Common compatible design and cutting software include: Often bundled with the machine. While the driver handles the connection, you need
Once you have downloaded the Jinka JK 1351 driver software, you can install it on your computer. Here are the steps:
If you are experiencing a specific error while setting up your plotter, please let me know:
This is a classic communication mismatch. It happens when the driver is functioning, but the Baud Rate or Flow Control settings are incorrect. Lower your Baud Rate to 9600 in both Device Manager (under Port Properties) and your cutting software to stabilize data transfer. 3. Yellow Exclamation Mark in Device Manager In the device selection screen, add (or JK-1350)
Given that Windows 10 and 11 are the most common operating systems today, here's a comprehensive guide specifically for these platforms.
: Requires specific drivers that support laser-eye registration marks. Jinka Indonesia provides dedicated Google Drive links for these specialized models.
Navigate to the or Cut/Plot settings menu within your software.