: You can download the PRJ-80 series driver directly from the Panda POS Driver Portal (Note: Pay close attention to case sensitivity when typing this URL).
Go to and navigate to the Device Settings tab.
The is a high-speed thermal receipt printer favored for its 250mm/s printing speed and reliable auto-cutter. Setting it up requires installing the correct driver and configuring the USB port to match your system. Driver Installation Guide
Change the USB cable, plug the printer into a port directly on the back of the motherboard, and restart the print spooler service. 3. The Auto-Cutter Does Not Work driver printer panda prj80us best
Choose your preferred language and accept the license agreement.
Ensure the printer is connected to your computer via the USB cable. Turn the printer on and ensure paper is loaded correctly. 2. Download the Driver
In your PC's "Devices and Printers" settings, check which port (e.g., USB001) the printer is using by looking at the . : You can download the PRJ-80 series driver
The driver controls cash drawer triggering via the RJ11 port.
The Panda PRJ80US is an efficient, workhorse receipt printer. By ensuring you have downloaded and installed the , and by following proper configuration settings (like setting it to ESC/POS emulation ), you will guarantee fast, reliable, and crisp printouts for your business.
Windows 10 and Windows 11 are the most common operating systems for modern POS systems. The driver installation on these platforms follows the same steps mentioned above, but you can also use the built‑in Windows tools if the automatic installer runs into trouble. Setting it up requires installing the correct driver
A common issue is the printer not responding because the driver is assigned to the wrong virtual USB port.
Ensure the default paper size is set to 80mm x 297mm or Roll Paper 80 x Receipt rather than standard Letter/A4 size.
Right-click the printer icon, select , and click Print Test Page .