Autokent Mvci Multi Driver — X64 Install 2021

Windows 7, 8, 10, or 11 (64-bit versions).

Secure the AutoKent MVCI Multi Driver x64 executable or compressed archive from a trusted automotive forum or resource.

: Choose the driver version that matches your cable firmware. If unsure, v1.4.1 is widely considered the most stable for older clones, while v2.0.4 is used for newer high-speed cables. Automated Install : The utility will place the necessary files in the Program Files (x86) directory and update the Windows Registry automatically. Verification

This setting resets after a normal reboot. You will need to repeat this step if you reinstall drivers later.

Repeat this for the second device. Once finished, they should appear as "USB Serial Converter" and "USB Serial Port (COM N)". Registry Modification Locate the mvci-x64.reg file within your Autokent folder. autokent mvci multi driver x64 install

If it has a yellow exclamation mark, you need to manually point the driver to the Autokent folder.

: Open a Command Prompt as Administrator and run: msiexec /a "C:\temp\MVCI Driver for TOYOTA.msi" /qb TARGETDIR=c:\temp\mvci .

Open Windows File Explorer and navigate to C:\Program Files (x86) . Create a new folder named XHorse .

Fortunately, the installer solves this exact problem. It packages all the necessary 64-bit registry fixes, driver files, and firmware tools into a single utility. This allows your diagnostic cable to communicate flawlessly with dealer-level software like Toyota Techstream, Honda HDS, and Jaguar-Land Rover (JLR) SDD on Windows 10 or Windows 11 64-bit. Windows 7, 8, 10, or 11 (64-bit versions)

Do not connect your USB interface to the computer yet. The driver must be registered in the system before Windows attempts to assign a generic device driver to the USB port.

: Designed to bypass the common "MVCI Driver for TOYOTA.msi" installation errors on x64 systems. Installation Overview

Windows may have overridden the custom driver with a generic Microsoft update. Right-click the faulted device, select Properties , go to the Driver tab, and click Roll Back Driver . Frequent Disconnections or Dropped Signals

Before starting the installation, complete these preparatory steps to prevent software conflicts: If unsure, v1

This adds necessary paths to HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PassThruSupport.04.04 , telling Techstream where to find the MVCI32.dll . 4. Configuring Techstream Once the driver and registry are set: Open . Navigate to Setup > VIM Selection .

Ensure your MVCI (Mini VCI) cable is unplugged until prompted.

Plug your Mini VCI / MVCI J2534 cable into an available on your computer. Note: USB 3.0 ports (blue slots) can sometimes cause communication timeouts with older diagnostic firmware.