Deckma Omd11 Manual Jun 2026

The OMD-11 unit must be fixed to a rigid vertical surface, ideally at eye level, using four M5 bolts. The unit should be mounted in a manner that protects it from extreme vibrations and excessive heat. 3.2. Piping and Sample Conditioning

Common issues (e.g., “Lamp failure”, “Flow low”, “Calibration error”) are listed with probable causes and fixes. Many technicians find this the most useful part.

0 – 30 ppm (Trend indication up to 50 ppm). Accuracy: Compliant with IMO requirements.

If the unit fails, Deckma recommends a "service exchange unit" or upgrading to a newer model like the OMD-2008 to ensure continued compliance. or details on the programming mode for adjusting alarm set points? OMD-11 Oil-in-Water Monitor Manual | PDF | Relay - Scribd

To help customize this guide further,I can provide the , help troubleshoot a specific error code your unit is displaying, or explain the MARPOL MEPC regulations governing bilge discharges. Share public link deckma omd11 manual

Periodically flush the unit with clean, oil-free water to verify the "Zero" reading.

Oil droplets suspended in the water scatter the light beam.

Understanding the technical limits of the OMD-11 ensures safe operation and prevents system damage. 0 to 30 ppm (parts per million). Accuracy: Meets IMO Resolution MEPC.60(33) standards. Linearity: Better than ±2 ppm. Display: Seven-segment LED display.

The is a widely used, high-performance oil-in-water monitor designed to monitor bilge water discharge, ensuring compliance with international environmental regulations . As a critical component of oily water separators (OWS) on ships, understanding the Deckma OMD-11 manual is essential for marine engineers and operators. The OMD-11 unit must be fixed to a

What is the you are experiencing? What is the current color of your desiccator gel ? Are you prepping for an upcoming shipboard inspection ?

. Although now considered an older model and no longer in production, it remains widely supported for calibration and spare parts. Technical Specifications

Proper installation ensures stable readings and prevents mechanical wear on the measuring cell components. Piping and Positioning

For more information on the Deckma OMD11 or to obtain a copy of the manual, please contact: Piping and Sample Conditioning Common issues (e

While modern engine room displays offer intuitive menus, the physical or PDF manual remains the only source of truth for:

Adjustable operating delay between 2 and 20 seconds. Operating Principle OMD-11 Oil-in-Water Monitor Manual | PDF | Relay - Scribd

The cleaning wiper should be inspected to ensure it is operating freely. 5. Summary Table Specification Model IMO Regulation MEPC.60(33) Max Response Distance Alarm Limit Signal Output Mounting 4 x M5 Bolts (Vertical)