Firmware Version Dwr-m960-v1.1.49 ((better)) 〈Updated〉

This analysis is based on the latest publicly available information as of 2026. Always refer to D-Link's official support channels for the most current updates and recommendations.

Known limitations and notes

Type the default IP address into the address bar: 192.168.0.1 (or check your router's bottom label for the specific address). Log in using your admin credentials. Step 3: Flash the New Firmware firmware version dwr-m960-v1.1.49

This was a serious risk for anyone using this firmware version, as it exposed the router's management interface to potential compromise from within the local network.

| From Version | Recommendation | |--------------|----------------| | < 1.1.40 | – fixes stability and IPv6 issues. | | 1.1.45–1.1.48 | Optional – upgrade only if experiencing UI sluggishness or LTE reconnection delays. | | 1.1.49 | No need to change. | This analysis is based on the latest publicly

: Version 1.1.49 retains the SPI and NAT firewalls to block potential Internet attacks. 📶 Performance Specs

According to the official D-Link Support Announcement (SAP10363) , devices running firmware versions equal to or directly older than were flagged for vulnerabilities that could risk unauthorized device access or network stability compromises. Why Checking Your Revision Matters Log in using your admin credentials

Access the router management page ( 192.168.0.1 ) through your browser.

Your immediate action should be to upgrade to a patched or updated firmware version as recommended by D-Link. By following the step-by-step upgrade guide provided above, you can patch the security holes in v1.1.49, ensuring the integrity of your network, protecting your personal and business data from potential cyberattacks, and maintaining the high-performance standards of your D-Link DWR-M960 4G AC1200 LTE router. Do not delay—secure your network today.

Navigate to the or Support tab on the product page.