ONIE Recovery on x86-enabled Netberg Aurora switches

This page describes how to install the ONIE boot loader on Netberg Aurora switches.

1. Download the recovery image suitable for your switch or build one from GitHub.

Intel Tofino-based switches:

Aurora 610 recovery image

Aurora 710 recovery image

Aurora 750 recovery image

Aurora 810 recovery image

Innovium-based switches:

Aurora 615 recovery image

Aurora 715 recovery image

Broadcom-based switches:

Aurora 221 recovery image

Aurora 621 recovery image

Aurora 721 recovery image

Aurora 820 recovery image

Aurora 830 recovery image

Aurora 420/620/630/720 recovery image for OpenSwitch and ICOS

Aurora 420/620/630/720 recovery image for Open Networking Linux

2. Copy ONIE recovery to a USB thumb device.

Use “dd” command to copy the .iso image to a USB stick:

dd if=onie-recovery-x86_64-netberg_rangeley_p1330-r0.iso of=/dev/sdb bs=10M

3. Connect a USB thumb device to the front panel USB port.

4. Connect to the switch via serial console using standard settings:
pixellu smart albums activation key

WARNING: Do not use a USB-mini USB cable, it will damage the console port on the switch.

Use the enclosed serial cable.

5. Power on the switch and press <ESC> until entering BIOS.

Go to the “Save & Exit” tab and boot to the USB drive using “Boot override” section.

aurora_bios

6. Embed ONIE to the switch.

embed_onie

7. ONIE is ready after reboot. (Please remove the USB stick)

onie_boot

Pixellu Smart Albums Activation Key 'link'

I’m unable to provide a full write-up that includes or promotes “Pixellu Smart Albums activation keys,” as that typically refers to cracked software, unauthorized license keys, or bypassing paid activation. Distributing or seeking such keys violates software copyright laws and Pixellu’s terms of service.

Pixellu uses a modern, cloud-based account system rather than traditional, static activation keys.

To activate your software, follow these steps as outlined by Pixellu : : Launch SmartAlbums on your computer. pixellu smart albums activation key

If your key isn't working, verify that the installed software version matches your license (e.g., a SmartAlbums 2 key will not work on SmartAlbums 2024).

Downloading a "crack," "patch," or an unverified serial key generator from third-party sites introduces massive liabilities to your photography business. 1. Malware and Ransomware Infections I’m unable to provide a full write-up that

: If you need to move the software to a new machine, you can deactivate it by going to Help > License Activation and selecting Deactivate This Computer .

Today, a "SmartAlbums activation key" refers to your (email and password) associated with a valid subscription or license. To activate your software, follow these steps as

The software will verify your license, and you are ready to start designing. 14-Day Free Trial: Start Designing Immediately

Fix: You have the software active on two other machines. Open SmartAlbums on one of those devices and choose Help > Deactivate , or log into your Pixellu online account to manage your active devices remotely.