Kirisun Programming Software Pt8100 -

Professional-grade communication requires both privacy and the ability to control a fleet remotely.

Re-check Device Manager. Try switching the USB cable to a different USB port on your PC, update the driver, and update the COM port number in the Kirisun software settings. "Model Mismatch" Error

You are trying to program a frequency that falls outside the hardware limits of the radio (e.g., attempting to program UHF frequencies into a VHF radio body). Double-check the exact model number printed on the back plate of your Kirisun PT8100. Corrupted Codeplug / Bricked Unit kirisun programming software pt8100

Before you build a codeplug from scratch (which is tedious), read the existing configuration from the radio:

What is the you are trying to configure (VHF or UHF)? "Model Mismatch" Error You are trying to program

Kirisun-compatible 8-pin RJ45 to USB programming cable.

Configure CTCSS or DCS tones if you wish to mute unwanted traffic. Select "None" if you want to hear all traffic on the frequency. Kirisun-compatible 8-pin RJ45 to USB programming cable

Set up 2-tone, 5-tone, DTMF, and PTT ID.

: Use a version compatible with your radio's firmware (e.g., v1.2.1) to avoid "Model Mismatch" errors. download link

Note the allocated COM Port number (e.g., COM3, COM4). You will need this later. Step 3: Install KSP8100

Prolific or FTDI USB-to-Serial drivers, depending on your programming cable. Hardware Prerequisites